MAC TOOLS MW250 Manuel d'installation télécharger pdf (Page 32)

IP DECT Installation Page 32

15-601085 Issue 04f (11 June 2009)IP Office

Process

1.For this process the PC, the base station and TFTP server should all be connected to the same LAN.

2.If the TFTP server provides any view of file requests and transfers, it will be useful to have that view visible during

this process.

3.Apply power to the base station.

4.Locate the IP DECT folder on the IP Office Administrator Applications CD or DVD.

5.Double-click on the ADM_Configurator_1_1_5.jar file (the version number may vary).

6.This tools needs Java Runtime Environment version 1.4 or higher installed on the PC. That can be achieved by

installing the IP Office System Status Application (SSA).

7.In the MAC Address field enter the MAC address of the base station.

8.Click List configuration.

9.If the base station has never been statically configured, no settings are shown but the message list ok at the

bottom-left confirms that communication occurred.

10.If the base station has previously been statically configured, the previous settings should be displayed.

11.Check that Use local configuration is set to yes. This set the base station to use static addressing rather than

DHCP. To return the base station to DHCP operation, this setting must be changed back to no.

12.Enter the parameters required.

13.The parameters shown above are mandatory.

14.Parameters not shown can be added by clicking Add parameter, selecting the required parameter from the New

Parameter list and then clicking Add.

15.The base station assigned the same IP Address as entered for the ADMM IP Address becomes the ADMM base

station. Any base station can be used for this function, however there must only be one ADMM base station.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 109 110

Pas de commentaire

MAC TOOLS MW250 Manuel d'installation Page 32