MAC TOOLS MW250 Manuel d'installation télécharger pdf (Page 41)

IP DECT Installation Page 41

15-601085 Issue 04f (11 June 2009)IP Office

Base Station Installation: ADMM Setup

6.Click IP Regions.

· Click New.

· Set the ID to 1.

· Enter a Name such as IP Office.

· Select the correct Time Zone.

· Click OK.

7.Select IP DECT Base Stations.

· Click New.

· Add the MAC Address of the base station.

· In Location enter a note of its physical location.

· Set the IP Region to match the ID of the one just created, for example 1.

· Select the tick box next to DECT Settings.

· Enter the cluster number for the DECT cluster, for example 1.

· Click OK.

· It may take up to 5 minutes but the Active and Synchronous settings of the base station should change to

green.

· Repeat this part of the process for the other base stations. Ensure that the cluster settings accurately reflect

the groupings of the base stations that can synchronize with each other.

8.Select IP Trunks.

· Click New.

· Enter a Name for the trunk, for example IP Office.

· In CS IP Address enter the IP address of the IP Office LAN to which the IP DECT system is connected (LAN1

or LAN2).

· In IP Region enter the IP region ID previously set, for example 1.

9.Select System Features.

· Select Voice Mail.

· For the Voice Mail Number enter *17 (or the matching IP Office system short code if it has been changed

from this default).

· Click OK.

10.Select MSSF or Media Server System Features.

· Select those features that you want active for users and enter the matching system short codes configured on

the IP Office. The following are the default IP Office system short codes.

· Call Pickup: *30

· Directed Call Pickup: *32*

· Send All Calls Enable: *08

· Send All Calls Cancel: *09

· Call Forward All: *01

· Call Forward Busy/No Reply: *03 or *05

· Call Forward Cancel: *00

· Call Unpark: *38*

· Transfer: Not supported by short code.

· Enquiry: Not supported by short code.

· Conference: *47

· Call Park: *37*

· Click OK.

11.Select Directory.

· Set the Type to TFTP.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 109 110

Commentaires sur ces manuels

Pas de commentaire

MAC TOOLS MW250 Manuel d'installation Page 41

Commentaires sur ces manuels

Produits connexes et manuels pour Système de soudage MAC TOOLS MW250