MAC TOOLS MW250 Manuel d'installation télécharger pdf (Page 88)

IP DECT Installation Page 88

15-601085 Issue 04f (11 June 2009)IP Office

6. Maintenance

6.1 Phone Maintenance

The IP DECT 3701 and 3711 handsets provide a number of maintenance and diagnostics functions. These are accessed

by pressing Menu and then dialing the sequence R***76#.

Checking the 3701 Phone Firmware Version

1.Press Menu.

2.Enter R***76#.

3.Select Version Number.

4.Press OK.

5.The display will show the software and the hardware level of the phone.

6.To stop the test, switch the phone off and on again.

3711 Phone Auto Call Test Mode

In this mode, the phone calls a specified number cyclically. You can use this feature to generate traffic for test purposes.

This mode is also active if the phone is on the charger.

1.Press Menu.

2.Enter R***76#.

3.Select Auto Call Test and press OK.

4.Enter the phone number to call and press OK.

5.Enter a number of seconds between two calls and press OK.

6.Enter a number of seconds a call shall be active and press OK. The test will be started automatically.

7.To stop the test, switch the phone off and on again.

3711 Phone Auto Answer Test Mode

In this mode, the phone answers incoming calls automatically. You can use this feature for test purposes. This mode is

also active if the phone is on the charger.

1.Press Menu.

2.Enter R***76#.

3.Select Auto Answer and press OK.

4.Enter a number of seconds the phone shall ring before it will answer the call and press OK.

5.Enter a number of seconds a call shall be active and press OK. The test will be started automatically.

6.To stop the test, switch the phone off and on again.

Phone Master Reset

Erase all the phone settings.

1.Press Menu.

2.Enter R***76#.

3.Select Master Reset and press OK.

4.Press OK again.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 109 110

Pas de commentaire

MAC TOOLS MW250 Manuel d'installation Page 88